These beautiful hangers are made entirely of metal with an antiqued silver/pewter finish. They feature a Samurai warrior with katana raised and ready to strike. They should fit most traditionally shaped swords. (Measurements are given below so you can double-check.)
The hangers can be used to hold many items, including swords, axes, halberds, etc. They would also make interesting coat/hat hangers, and I'm sure there are many other creative uses for them.
The hangers can be used to hold items horizontally or vertically, and they have a spring-action telescoping feature where the front part extends outwards from the back part when necessary.
Horizontal Sword Example: The hangers would be spaced relatively far apart and the sword would be lain across the hangers horizontally
.
Vertical Sword Example: The hangers would be spaced relatively closely, and the sword would hang vertically with the guard resting on the hangers.
Measurements
Height of back (base) of each hanger : 1.2"
Height of back (base) of each hanger : 2.8"
Height of front part of each hanger : 2.3"
Width of front part of each hanger : 1.8"
Non-telescoped opening : 1.3"
Maximum (telescoped) opening : 2"
The hangers would extend approximately 1.9" from the wall in the non-telescoped position.